DeceptiSean

Not yet, been waiting for shrink wrap and extra time to work on it. Sent from my iPhone using Tapatalk

I might have to try something like that. I'll need to bore out the holes some more first. Thanks! Sent from my SM-G920V using Tapatalk

I placed the microphones behind the middle of the ears. My guess is the microphones are picking up the vibration of the fans through the plastic. Sent from my SM-G920V using Tapatalk

One of the first things I did with my TK helmet was install a couple of 5v fans towards the front. Since then it's been difficult to hear while the fans are running. So then next step was a hearing aid of some sort. I know there's that guy who makes them and sells for 60 bucks on the FISD forum but that's a bit pricey for me. While wandering around a Radio Shack I stumbled upon this... I spent about an hour and a half soldering and got this... And installed... Pretty cool, only problem is the noise from the fans have been amplified and I definitely can't hear anything else. Any suggestions on how to fix? Sent from my SM-G920V using Tapatalk

I was able to find an all black Wilson compression shirt with a small logo at Big 5 and all black Champion running tights on Amazon. Sent from my SM-G920V using Tapatalk

Can you add me to your Facebook group? Sent from my SM-G920V using Tapatalk

Welcome Frankie! I recently finished my kit. If there's anything I can help with, feel free to PM me with any questions you might have. Sent from my SM-G920V using Tapatalk

Bam, just made Centurion! Sent from my SM-G920V using Tapatalk

I made Expert Infantry! Next up Centurion. Sent from my SM-G920V using Tapatalk

After a couple of fixes and acquisition of said blaster, I figured it was time to submit for EIB. I don't anticipate any major issues since I built with centurion in mind. I just hope they think I built my TK as well as I think I did. Sent from my SM-G920V using Tapatalk

Got my blaster today! Sent from my SM-G920V using Tapatalk

Thank you again Mr. Stutz! I am having a little trouble with the abs paste. I get bubbles once it dries. I have sanded the area after, starting with 220 then 400 and finished with 1500. When I polish after it comes out very smooth but not as shiny. I think I might have to get an even finer grit sandpaper and try a different polish. Sent from my SM-G920V using Tapatalk

Apparently using the webbing was my bad. I was under the impression that elastic would be to weak. I'm replacing the nylon webbing with some of my 1 inch elastic I have left over. I applied some abs paste to some of the more damaged holes and after extensive sanding and polishing, I'm not entirely happy with the outcome. You can tell that top hole had the worst blow out. I want to try painting over the area. Sent from my SM-G920V using Tapatalk

So 4 of 6 rivets caused cracking in my kidney to ab connection. Glued reinforcement abs strips behind holes and abs pasted the tops. Lots of sanding and polishing in my future. Anybody else have this issue with any kit? Have suggestions on how to best move forward or did I cover it. Sent from my SM-G920V using Tapatalk

Thanks! I'm going to give it a try. Sent from my SM-G920V using Tapatalk